35
8
CLOCK AND ALARM SETTINGS
8.1
Date and Time Settings
If you have subscribed to Calling Number Display (CND) service, the time
and date settings will be automatically updated by the network when you
receive an incoming call.
You can also set the date and time manually.
1.
From the home screen, press
M
.
2.
Press
+
/
-
to CLOCK&ALARM and then
M
to select.
3.
Press
M
again to select DATE/TIME.
•
The last stored date is displayed.
4.
Enter the current date and press
M
to confirm. The default date
format is DD/MM.
(To change date format, see
For DD/MM format, enter 03 May 2012 as [1], [2], [0], [3], [0], [5].
For MM/DD format, enter 03 May 2012 as [1], [2], [0], [5], [0], [3].
If you make a mistake, press
m
to delete the last digit entered.
5.
Enter the current time and press
M
to confirm. The default time
format is 24 HOURS.
(To change time format, see
For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
For 12-hour format, enter the time and then press
+
/
-
to
select
AM
or
PM
.
If you make a mistake, press
m
to delete the last digit entered.
•
A confirmation tone is played.
6.
Press
O
to return to standby mode.
