iDect FC4A-C10R2C, User Manual

Page: 6 / 46

1: G
ENERAL
I
NFORMATION
1-2
Applicable CPU Modules and WindLDR Version
END refresh type analog I/O modules as many as listed below can be used with any FC4A and FC5A
MicroSmart
CPU
modules and
WindLDR
versions.
Ladder refresh type analog I/O modules can be used with the FC4A and FC5A MicroSmart CPU module system program
versions and WindLDR versions as listed below.
All-in-one 10- and 16-I/O type CPU modules cannot use either END refresh or ladder refresh type analog I/O modules.
Note: FC5A all-in-one 24-I/O type CPU modules cannot use analog I/O modules in combination with the AS-Interface master
module (FC4A-AS62M) and/or expansion RS232C communication module (FC5A-SIF2). When using these modules in combi-
nation with analog I/O modules, use the slim type CPU module.
Confirming System Program Version
The system program version can be confirmed using WindLDR .
1. Connect a PC to communication port 1 or 2 on the MicroSmart CPU module using the computer link cable 4C
(FC2A-KC4C).
2. From the WindLDR menu bar, select Online > Monitor . The monitor mode is enabled.
3. From the WindLDR menu bar, select Online > PLC Status . The PLC Status dialog box appears and shows the sys-
tem program version.
FC4A MicroSmart
CPU Module
All-in-One Type Slim Type
FC4A-C10R2
FC4A-C10R2C FC4A-C16R2
FC4A-C16R2C FC4A-C24R2
FC4A-C24R2C FC4A-D20K3
FC4A-D20S3
FC4A-D20RK1
FC4A-D20RS1
FC4A-D40K3
FC4A-D40S3
CPU System Program Version — — 204 or higher 204 or higher 203 or higher
WindLDR Version — — 5.0 or higher
Quantity of Analog I/O Modules — — 4 7 7
FC5A MicroSmart
CPU Module
All-in-One Type Slim Type
FC5A-C10R2
FC5A-C10R2C FC5A-C16R2
FC5A-C16R2C
FC5A-C24R2
FC5A-C24R2C
(Note)
FC5A-D16RK1
FC5A-D16RS1 FC5A-D32K3
FC5A-D32S3
CPU System Program Version — — 100 or higher 100 or higher 100 or higher
WindLDR Version — — 5.0 or higher
Quantity of Analog I/O Modules — — 4 7 7
System Program Version
(Special data register D8029)
Phone: 800.894.0412 - Web: www.clrwtr.com - Email: info@clrwtr.com