IDEC WB2F User Manual Download | Manualshive

Page: 9 / 41

background image

1-1

1

Overview

This chapter provides an overview of the WB2F Support Tool and usage precautions.

1. 1 Overview

The WB2F Support Tool is software for configuring the WB2F and checking its operation.

1. 2 Usage Precautions

In order to use the support tool correctly, please be aware of the following precautions.

z

When the WB2F and the WB2F Support Tool are connected, do not turn off the WB2F power supply.
The WB2F Support Tool may be forcibly terminated.
After stopping the connection between the WB2F and the WB2F Support Tool, turn off the WB2F power supply.

z

When the WB2F and the WB2F Support Tool are connected, do not allow the computer to enter sleep mode. The WB2F
Support Tool may be forcibly terminated.
If the WB2F and the WB2F Support Tool are connected and left for a long period of time, configure the computer so that
it does not enter sleep mode.

z

Do not run multiple instances of the WB2F Support Tool at the same time. The support tool may not operate correctly.

«
...
7
8
9
10
11
...
»

Summary of Contents for WB2F










































Reviews:

No comments

Related manuals for WB2F

OBID classic-pro ID CPR.03.20-CD

Brand: Feig Electronic Pages: 40

Brand: Magellan Pages: 2

Brand: American Dynamics Pages: 20

Cyclone M2000 Series

Brand: Symbol Pages: 302

Brand: Addonics Technologies Pages: 1

Brand: Citizen Pages: 107

Brand: Aritech Pages: 9

Brand: Unitech Pages: 2

Brand: Velleman Pages: 2

Brand: Velleman Pages: 32

Advanced CLV650

Brand: SICK Pages: 124

Brand: Speedata Pages: 10

Brand: Abit Pages: 9

Brand: Rosslare Pages: 52

Smart Card Reader

Brand: Wincor Nixdorf Pages: 23

UNIVERSAL MENU BOOK

Brand: Opticon Pages: 151

Brand: Mirano Pages: 17

Brand: Diablotek Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands