manualshive.com logo in svg

IDEC WB2F, User Manual

Share
Download
IDEC WB2F User Manual Download Page 33

2 Operational Check

3 Window and Menu

4 Appendix

1 Overview

4-2

Troubleshooting

4. 1. 3 

Cannot connect to the WB2F Support Tool because the WB2F RS-232 settings were forgotten

 

„

 On the Connection settings screen, select the communication port to which the WB2F is connected, and then 
click Connect automatically.

The support tool automatically searches for the communication settings that the WB2F is set to.
This may take some time. (The maximum time: About 1 min 30 sec.)

 

„

Check the communication settings from maintenance mode.

1 

Switch to maintenance mode.

(Refer to the WB2F user’s manual.)

2 

 Start the WB2F Support Tool and click Connection with the default settings.

• Default settings

Speed

9600 bps

Flow control

None

Data length

8

Prefix

5E,00,00,00

Parity

EVEN

Suffix

0D,0A,00,00

Stop bits

1

Check digit

None

3 

Double-click Console to open the Console screen.

4 

Enter “comgetm” and click Send.

* Select only the Pref. ON and Suf. ON check boxes.

5 

Check the communication settings that are set on the WB2F from the response results (red).

Summary of Contents for WB2F










































Reviews:

No comments

Brands by name

Popular brands

Load more brands