2 Operational Check
Screen and Menu
4 Appendix
1 Overview
3-7
Menu Item Descriptions
z
Control command
This screen is for transmitting control commands to the WB2F.
Actions can be executed such as starting and stopping symbol reading and turning the status LEDs on and off.
(1)
No.
Name
Description
(1)
Control command but-
tons
The control commands to execute are assigned to buttons.
z
The results of control command requests and responses can be checked with the console, image monitor,
and monitor for reading result.
z
Timing adjustments for moving bodies
The image capture timing for moving bodies can be adjusted by using One Shot Reading ON.
When One Shot Reading ON is enabled and reading is executed from an external input, the image is cap-
tured one time and decoding is performed regardless of the read settings.
If an image is captured immediately after reading, the initial captured image can be acquired.
Adjust the reading target so that it appears at the intended location in the captured image.
Procedure
1. Click One Shot Reading ON enable.
2. Execute reading.
3. Click One Shot Draw JPEG or One Shot Draw BMP.
4. Check the image displayed on the image monitor.
* The One Shot Reading ON state is reset each time reading is executed.
Click the button each time you perform reading as necessary.
