Getting started with IDEC SmartRelay
10
IDEC SmartRelay Manual
Note
You will find current approvals on the rating plate of the rel-
evant module.
IDEC SmartRelay is issued with the CE Certificate of Confor-
mity. It is compliant with VDE 0631 and IEC 61131-2 and in-
terference-proof to EN 55011, Limit Class B.
Marine certification has been requested.
•
ABS (American Bureau of Shipping)
•
BV (Bureau Veritas)
•
DNV (Det Norske Veritas)
•
GL (Germanischer Lloyd)
•
LRS (Lloyds Register of Shipping)
•
Class NK (Nippon Kaiji Kyokai)
IDEC SmartRelay is therefore suitable for use both in indus-
try and in the domestic area.
ID for Australia
Recycling and Disposal
IDEC SmartRelay units can be fully recycled, due to their
low-pollutant equipment. Contact a certified electronic waste
disposal center for environmentally acceptable recycling and
disposal of your old devices.
!
Warning
Risk of personal injury and material damage.
In potentially explosive atmospheres, there is a risk of personal in-
jury or damage to material if you disconnect connectors when the
system is in RUN.
In potentially explosive atmospheres, always switch off the power
supply to IDEC SmartRelay and its components before you discon-
nect any connectors.
Our products carrying the label shown at the side are com-
pliant with AS/NZS 2064:1997 (Class A) standard.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
