FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
C
OMMUNICATION
M
ANUAL
FC9Y-B1730
10-7
10: S
END
E-
F
UNCTION
Special Data Registers/Special Internal Relays
Initialize sending e-mail server settings
The values set in the
Function Area settings
can be reflected to the corresponding data registers as the initial values by using
special internal relay M8211.
Special Internal Relays
Note:
Strings can be stored in data registers. Strings start from the specified data register. The end of each string is specified with 00h which is
stored in the high-order byte or the low order byte of the value in a data register. 1 word of data is handled as 2 bytes and is used in high-order byte
to low-order byte order.
■
Text Encoding
(10) Character Set
The character set for the e-mail subject, body, and attached file can be specified.
ASCII: Specify when e-mail subject and body consist of ASCII characters only.
Japanese (ISO-2022-JP): Specify when e-mail subject and body consist of ASCII and Japanese characters. The character set for
the attached file is Shift_JIS.
Chinese (GB2312): Specify when e-mail subject and body consist of Chinese characters.
Western European (ISO-8859-1): Specify when e-mail subject and body consist of western European characters.
Unicode (UTF-8): Specify when using Unicode characters.
In general, any characters can be used using Unicode. Depending on sending e-mail servers that relay the e-mails or the mailer
used by the recipients, the e-mails sent out from the FC6A Series MicroSmart may not reach the recipients or may not be viewed
correctly in the mailer.
When ASCII is used, e-mails can be viewed in the same manner in any mailer though only ASCII characters can be used.
Contact the administrator of the sending e-mail server to confirm the supported character sets. Select the appropriate character
set for the mailer of the recipients.
(11) Encode Text Using
The encoding format for e-mail body can be specified. Depending on the sending e-mail servers that relay the e-mails, the
e-mails in which 8-bit characters are used cannot be sent. In such case, Base64 encoding can be used to convert the 8-bit
characters into 7-bit characters.
None: The e-mail body is not encoded.
Base64: The e-mail body is encoded with Base64 format.
(12) Decimal Symbol
The decimal symbol for the floating-point values can be specified. When the data type of a data register embedded in the e-mail
body is float, data register value is converted and shown as a floating-point value in the e-mail body.
Period (.): Period ’.’ (2Eh) is used.
Comma (,): Comma ’,’ (2Ch) is used.
(13) Separating Character
The separator for the attached CSV file is automatically determined by the selected
Decimal Symbol
.
Device
Address
Description
Details
M8211
Initialize sending e-mail server settings
When this relay is turned on, the values set in the function area settings are set
as the initial values in the target data registers.
Decimal Symbol
Separator Character
Period '.' (2Eh)
Comma ',' (2Ch)
Comma ',' (2Ch)
Semicolon ';' (3Eh)