manualshive.com logo in svg

IDEC HR6S Series, Original Instructions Manual, Page: 91 / 91

Share
Download
IDEC HR6S Series Original Instructions Manual Download Page 91

www.idec.com

Specifications and other descriptions in this brochure are subject to change without notice.
2020 IDEC Corporation, All Rights Reserved. 

B-2190 (0)  August 2020

Head Office
6-64, Nishi-Miyahara-2-Chome, Yodogawa-ku, Osaka 532-0004, Japan

USA

 IDEC 

Corporation 

Tel: 

+1-408-747-0550 

[email protected]

Germany

  APEM GmbH 

Tel: +49-40-25 30 54 - 0  [email protected]

Singapore

  IDEC Izumi Asia Pte. Ltd. 

Tel: +65-6746-1155 

[email protected]

Thailand

  IDEC Asia (Thailand) Co., Ltd  Tel: +66-2-392-9765 

[email protected]

Australia

  IDEC Australia Pty. Ltd. 

Tel: +61-3-8523-5900 

[email protected]

Taiwan

 

IDEC Taiwan Corporation 

Tel: +886-2-2577-6938  [email protected]

Hong Kong

 

IDEC Izumi (H.K.) Co., Ltd. 

Tel: +852-2803-8989 

[email protected]

China/Shanghai

  IDEC (Shanghai) Corporation  Tel: +86-21-6135-1515  [email protected]

China/Shenzhen

  IDEC (Shenzhen) Corporation  Tel: +86-755-8356-2977  [email protected]

China/Beijing

 

IDEC (Beijing) Corporation 

Tel: +86-10-6581-6131  [email protected]

Japan

 

IDEC Corporation 

Tel: +81-6-6398-2527 

[email protected]

Summary of Contents for HR6S Series




























































































Reviews:

No comments