IDEC HR6S Series, Original Instructions Manual, Page: 68 / 91

Functions
68
HR9Z-B2190 8/2020
Configuring the Start Function
The start function is configured by means of the start function selector.
A start function with dynamization is typically if the start input is connected to a start push-button.
A start function without dynamization is typically used if the start input is connected to a logic
controller. Refer to the chapter Dynamization
( see page 42 ) for details.
Position of start function selector Configured start function
1

Automatic/manual start (depends on
sensor/device connected to start input)

Without startup test

With dynamization
2

Automatic/manual start (depends on
sensor/device connected to start input)

With startup test

With dynamization
3

Monitored start

Without startup test

With dynamization
4

Monitored start

With startup test

With dynamization
5

Automatic/manual start (depends on
sensor/device connected to start input)

Without startup test

Without dynamization
6

Automatic/manual start (depends on
sensor/device connected to start input)

With startup test

Without dynamization
7

Monitored start

Without startup test

Without dynamization
8

Monitored start

With startup test

Without dynamization