IDEC SmartRelay functions
214
IDEC SmartRelay Manual
Parameters L1, L2
The analog values for the parameters L1 and L2 can be
derived from another already-programmed function. You can
use the actual values of the following functions:
•
Analog comparator (actual value Ax - Ay, see Chapter
4.4.18)
•
Analog trigger (actual value Ax, see Chapter 4.4.16)
•
Analog amplifier (actual value Ax, see Chapter 4.4.20)
•
Analog multiplexer (actual value AQ, see Chapter 4.4.26)
•
Analog ramp control (actual value AQ)
•
Analog math (actual value AQ, see Chapter 4.4.30)
•
PI controller (actual value AQ, see Chapter 4.4.28)
•
Up/down counter (actual value Cnt, see Chapter 4.4.13)
Select the required function by the block number. For
information on parameter defaults, refer to Chapter 4.4.1.
Parameter p (number of decimals)
Applies only to the AQ, L1, L2, MaxL, StSp and Rate values
displayed in a message text.
En
Sel
Level 2
Level 1
R
at
e
Ra
te
R
at
e
R
at
e
St
StSp+B
100 ms
100 ms
100 ms
MaxL
B
AQ
Timing diagram for AQ
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
