Programming IDEC SmartRelay
IDEC SmartRelay Manual
89
Assigning block parameters
Now you set the off-delay time T:
1. Move the cursor to
Par
, if it not already at this position:
Press or
2. Switch to editing mode: Press
OK
IDEC SmartRelay shows the parameters in the parameter
assignment window:
B2 +R
T
=00:00s
“+” means:
The parameter is
shown and can be
modified in the
parameter assignment
mode.
“R” means:
Retentivity is enabled
for this block.
T: The block
parameter
B2 is a time
function
Time value Timebase
To change the time value:
•
Press and to position the cursor.
•
Press and to modify the value at the relevant
position.
•
Confirm your entries with
OK
.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
