IDEAL TILT-A WAY HYJG 1, Operator'S & Parts Manual

Page: 46 / 131

EMX Industries, Inc. Tech support: 216-834-0761 1/6
ULT-PLG_Rev1.8_082619 technical@emxinc.com
ULT-PLG
™
Plug-In Vehicle Loop Detector
Instruction Manual
The ULT-PLG plug-in style vehicle loop detector senses metallic objects near an induction loop.
This vehicle detector may be used in center, reverse and exit loop positions. The ULTRA
METER™ display
allows for easy set-up by displaying the optimum sensitivity setting for detecting a vehicle near the loop
while ignoring interference. Ten sensitivity settings allow for fine adjustment of the detection level.
The ULT-PLG features a user configurable Output B for fail safe/secure, pulse on entry/exit, presence or
EMX exclusive, Detect-on-Stop
™ (DOS ® ). Four frequency settings provide flexibility in preventing crosstalk
in multi-loop applications.
Cautions and Warnings
This product is an accessory or part of a system. Install the ULT-PLG according to
instructions from the gate or door operator manufacturer. Comply with all applicable
codes and safety regulations.
Specifications
Ordering Information
• ULT-PLG Plug-in vehicle loop detector (included)
•
PR-XX Lite preformed loop (XX – specify size)
•
TSTL Test loop, troubleshooting tool
Power 12-24 VDC
Draw Current 15 mA
Loop Frequency 4 settings (low, med-low, med-hi, high)
Loop Inductance Range 20- 2000 µH (Q factor ≥ 5)
Surge Protection
Loop circuitry protected by surge suppressors
Operating Temperature -40º to 180ºF (-40º to 82ºC) 0 to 95% relative humidity
Connector
10 pin female
Dimensions (L x W x H) 3.0” (76 mm) x 0.9” (22 mm) x 2.75” (70 mm)