Data Array
Description
DA_STATUS
Array containing the below info
- Offset 0
Communication channel of system
- Offset 1
Communication network ID of system
- Offset 2
Number of sensors active in system
- Offset 3
Number of sensors that are sending a low battery signal
- Offset 4
“1” means gateway is set as a repeater
- Offset 5
Value (minutes) of timeout setting; mode disabled if “0”
- Offset 6
Number of sensors currently in timeout, if mode enabled
- Offset 7
Version of gateway software
DA_PWR
Battery voltage, or RSSI of RF powered sensors
DA_SECS
Time (seconds) since the last packet was received
DA_S1
Sensor input 1
DA_S2
Sensor input 2
DA_S3
Sensor input 3
DA_S4
Sensor input 4
DA_S5
Sensor input 5
DA_S6
Sensor input 6
DA_S7
Sensor input 7
DA_S8
Sensor input 8
DA_TXID
Transmitter ID (only valid in RF powered sensors)
XML Configuration
A Wireless Sensor Gateway with XML configured as the output can be accessed using HTTP-GET and HTTP-POST commands. Us-
ing this method, the data arrays in the Protocessor unit are accessed directly. The following table indentifies the arrays and the info
contained within.
NOTE:
Ethernet port for XML connection is internal to the WSG unit. Remove cover to access Ethernet port. The enclosure has a
notch in the side wall to seat the Ethernet cable so the lid can be re-attached.
IDEAL INDUSTRIES, INC.
1375 Park Avenue • Sycamore, IL 60178
Technical Hotline: 800-947-3630
www.idealwirelesssensors.com
P-5207
3/14
Users Guide
