V100 (2019-11)
Doc. Ref. XGC-320-100119
15
Use an appropriate power source of 12 to 28 V (dc), 2 W or use
Ideal Vacuum Products series optional power supplies.
Turn off power to the unit before attempting to service the con-
troller.
Turn off power to the unit if a cable or plug is damaged or the
product is not operating normally according to this instruction
manual. Contact qualified Ideal Vacuum Products service per-
sonnel for any service or troubleshooting condition that may not
be covered by this instruction manual.
It is important that the product be periodically inspected for
sound electrical connections and equipment grounding. Do not
use if the equipment grounding or electrical insulation has been
compromised.
Do not use if the unit has been dropped or the enclosure has
been damaged. Contact Ideal Vacuum Products for return
authorization and instructions for returning the product to Ideal
Vacuum Products for evaluation.
2.3
Electrical Conditions
WARNING!
When high voltage is present in any vacuum
system, a life threatening electrical shock hazard may exist un-
less all exposed electrical conductors are maintained at earth
ground potential. This applies to all products that come in con-
tact with the gas contained in vacuum chambers. An electrical
discharge within a gaseous environment may couple dangerous
high voltage directly to any ungrounded conductor of electricity.
A person could be seriously injured or killed by coming in contact
with an exposed, ungrounded electrical conductor at high volt-
age potential. This condition applies to all products that may
come in contact with the gas inside the vacuum chamber
(vacuum / pressure containment vessel).