Chapter 6
Using LANTEK REPORTER
6-23
3.
Click the desired
Upload Test Type
button.
4.
Select a job in the
Select Upload Job
text box.
Note: If you want to add AutoTests from a job in the cable tester to an existing LANTEK
Reporter project with the same name, you have to select the mother project as
<upload job>, that is located one level higher. (For example, JOB 1 in the cable
tester; select <LANTEK> as upload job)
5.
Select the Data Source.
•
Choose
Comm Port
for direct connection (USB or Serial) with the tester.
•
Or
Data Storage Device
if you have stored the test results on the compact
flash card and are using the USB flash card reader or if you have files
stored on an alternate media device on your PC (CD ROM, Zip Disk, Hard
Drive).
6.
Click
OK
to begin the uploading process.
7.
A status box will remain on screen during the uploading process and you will
have the option to cancel at any time.
Summary of Contents for LANTEK
