Chapter 6
Using LANTEK REPORTER
6-14
The Test Summary Information is located on the top of the screen.
Job Name
The name of the job to which this test belongs.
Customer
The customer for whom the test and job have been performed.
Test Standard
The standard used by the handset to perform the test.
Date
The date the test was performed.
Operator
The name of the operator who performed the test.
Test Instrument
The type and serial number of the instrument used to perform
the test.
Frequency Range
The test frequency range of the tested cable.
NVP
The Nominal Velocity of Propagation value defined for the
cable on which the test was performed.
Individual tests can be viewed by clicking on a test tab to display stored test
results. A red dot on a test tab indicates one or more tests within the tab failed. A
green dot indicates that all tests within the tab passed.
Summary of Contents for LANTEK
