28
Mexico Slimline RS 3/40 & 3/50 -
Installation
SERVICING
1.
Lift off lower front panel and remove
the grille assembly - refer to Frames
28 & 29. Undo the gas cock union.
Remove the burner assembly.
2.
Pull off the ignition lead at the
electrode.
The electrode is secured by a nut.
Remove the nut and withdraw the
electrode upward.
3.
Re-assemble in reverse order.
42 IGNITION ELECTRODE REPLACEMENT
43 THERMOCOUPLE REPLACEMENT
1.
Lift off lower front panel and remove the
grille assembly - refer to Frames 28 &
29. Undo the gas cock union. Remove
the burner assembly.
2.
Undo the thermocouple nut at the pilot
burner and connection at the gas valve
and pull the thermocouple clear.
3.
Fit the new thermocouple.
Note.
Avoid sharp bends in the
thermocouple lead and ensure that it
follows the same route as previously.
4.
Re-assemble in reverse order.
SER
VICING