maestro.idatalink.com
Automotive Data Solutions Inc. © 2016
5
JVC-RR(SR)-TOY01-DS-OG-EN
USING MAESTRO FEATURES - VEHICLE INFO
USING MAESTRO
FEATURES -
VEHICLE INFO
HOW TO GET THERE:
VEHICLE INFO
Access And Display Vehicle Info Screen
In the My Vehicle submenu, press on Vehicle
Info to display information about the vehicle
such as tire pressure, battery voltage and open
entry points. If your vehicle is equipped
with a compatible tire pressure monitoring
system (TPMS), the digital tire pressures will
be displayed for each tire. Should your check
engine light come on, the CHECK ENGINE
button will become active and you will be able to press this button to see the active trouble
codes and attempt to reset them.
Access And Change Vehicle Info Settings
Access the Maestro settings to confi gure the alerts that can be generated. These alerts will
cause the Vehicle Info screen to come up when certain conditions occur.
•Set Tire Location
Toyota vehicles do not have a pre-assigned designation for the location of each tire on the
vehicle. As an example, the tire pressure for the front left tire may display in the right rear
position. To correct this, the Maestro module allows you to set the tire location in the vehicle
info settings menu. Select the “Set Tire Location” menu option, then follow the on-screen
instructions. For this procedure, you will be required to defl ate each tire slightly.
NOTES: The tire pressures rely on proper programming by the technician when tires are changed or rotated. If your tires have been rotated but
not reprogrammed, the tire locations on this screen may be incorrect.
•Check Engine Alert
Enables the Vehicle Info screen to be displayed automatically when the check engine light
turns on in the vehicle. The diagnostic codes can be read and cleared.
Warning: If the check engine light turns on after clearing the trouble code, it may indicate serious problems with the engine. Have the vehicle
serviced by a qualified technician.