F
SECTION
TYPE 4 - WIRING DIAGRAM
Page 65 of 71
DBI-TB-KO-EN
20131003
install guide
TraNSpONdEr BypaSS
KO
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
1
2
3
4
5
6
7
5 4 3 2 1
86
30
87
87A
85
5
3
4
5
8 7 6 5
3 2 1
4
ENGINE
START
STOP
7
86
30
87
87A
85
3
4
1
2
2
1
3
1N4001
DIODE
1N4001
DIODE
1N4001
DIODE
1N4001
DIODE
1N4001
DIODE
N/A
1N4001
DIODE
12V (+)
KEYPORT
LTGREEN - TX
CT
BLUE - CODE
BLUE - KEYSENSE
KEYL
OCK SOLENOID (+)
PINK
REQUIRED:
1X 1K RESISTOR
2X RELAYS
AND
5X DIODES
REQUIRED ->
REQUIRED ->
GWR (-) INPUT - BLUE/WHITE
GWR (-) INPUT - BLUE/WHITE
BRAKE (+)
BRAKE (+)
IGNITION (+)
IGNITION (+)
(NC) WHITE
(NC) WHITE
GROUND - BLACK
GROUND - BLACK
12V (+) - RED
12V (+) - RED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
<- REQUIRED
UNLOCK (-)
UNLOCK (-)
LOCK (-)
LOCK (-)
TACH (AC) INPUT
TACH (AC) INPUT
ACCESSORY (+)
ACCESSORY (+)
12V (+)
12V (+)
GROUND (-)
GROUND (-)
GROUND WHEN RUNNING (-) OUTPUT
GROUND WHEN RUNNING (-) OUTPUT
WHITE/BLACK
WHITE/BLACK
WHITE/RED (NC)
WHITE/RED (NC)
WHITE - BRAKE RELAY CONTROL (-)
WHITE - BRAKE RELAY CONTROL (-)
BRAKE SWITCH
LOCATED ABOVE BRAKE PEDAL
12V (+)
BRAKE SWIT
CH
IGNITION
1K
1K
SYNCHRO - PINK
SYNCHRO - PINK
(NC) PINK/BLACK
(NC) PINK/BLACK
TACH - ORANGE
TACH - ORANGE
(NC) GRAY/YELLOW
(NC) GRAY/YELLOW
TXCT - GRAY/RED
TXCT - GRAY/RED
(NC) GREEN/YELLOW
(NC) GREEN/YELLOW
CODE - GREEN/RED
CODE - GREEN/RED
PTS (-) - BLUE/YELLOW
PTS (-) - BLUE/YELLOW
GROUND - BLUE/RED
GROUND - BLUE/RED
NOT REQUIRED IN DATA MODE (1-WAY)
NOT REQUIRED IN DATA MODE (2-WAY)
LEGEND
USE DATA MODE
OR HARDWIRE MODE
DATA MODE
DATA MODE
WIRE
AT BRAKE PEDAL
WARNING
DO NOT CONNECT ANY OTHER
ACCESSORY, IGNITION OR START WIRE
FROM THE REMOTE STARTER TO THE
VEHICLE. THE INTERFACE MODULE
IS HANDLING THE REQUIRED VEHICLE
POWER AND START SEQUENCE FROM
THE PUSH TO START BUTTON CIRCUIT.
NOTE: FACTORY KEYFOB
WILL NOT FUNCTION
WHEN REMOTE STARTER
IS ENGAGED.
FOR AFTERMARKET
KEYFOB FUNCTIONALITY,
HARDWIRE REMOTE
STARTER DOORLOCKS
AND ALARM OUTPUTS.
WARNING
IGNITION IS USED ONLY AS AN
INPUT TO THE REMOTE STARTER,
NOT AN OUTPUT TO THE VEHICULE.
DIODE CATHODE NEEDS TO BE
FACING THE REMOTE STARTER.
PTS (-)
YELL
OW
REMOTE STARTER
Doc. No.: ##12410##