E
SECTION
MODULE PROGRAMMING PROCEDURE
5
Module Programming
Procedure completed.
4
Turn key to OFF position.
OFF
1
Insert key into ignition.
2
Turn key to ON position.
ON
INSTALLATION MODE SELECTION
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
3
Wait, LED will turn solid GREEN
for 2 seconds.
Page 47 of 71
DBI-TB-KO-EN
20131003
install guide
TraNSpONdEr BypaSS
KO
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
Doc. No.: ##12410##