F
SECTION
XX-XX
PAGE X-X
ADS-AL(DL)-TL
PAGE 1-1
TYPE 1, 2 & 5 - MODULE PROGRAMMING PROCEDURE - REGULAR KEY
5
Module Programming
Procedure completed.
1
Insert key into ignition.
(OR insert key into keyport)
3
Wait, LED will turn solid GREEN
for 2 seconds.
2
LED will fl ash GREEN and RED.
4
Remove key.
(OR remove key from keyport)
ADS-AL(TB)-TL
17
ADS-TB-TL 17
INSTALLATION MODE SELECTION
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
Page 68 of 71
DBI-TB-KO-EN
20131003
install guide
TraNSpONdEr BypaSS
KO
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
Doc. No.: ##12410##