iDataLink BLADE-AL-FM3-EN, Install Manual

Page: 11 / 11

U.S. Patent No. 8,856,780
BLADE-AL
PAGE 1-1
Led sTaTUs
dIaGnosTICs
dUrInG proGraMMInG dUrInG reMoTe sTarT WITH IGnITIon oFF
Flashing RED
Missing/wrong information from
fi rmware or vehicle
Incorrectly programmed Incorrectly programmed or connected
Solid RED Waiting for more vehicle information Incorrectly programmed
Not programmed waiting for more
vehicle information
Flashing BLUE
Additional steps required to complete
programming
Correctly programmed and
operational
False ground when running status
from remote starter
Solid BLUE then OFF Correctly programmed Reset in progress Reset in progress
OFF No activity or already programmed
Invalid ground when running status
from remote starter
At rest and ready for a remote start
sequence
MODULE DIAGNOSTICS
FACTORY RESET PROCEDURE
5
RECONNECT all connectors.
Repeat programming procedure.
!
Failure to follow procedure may result with a DTC or a
CHECK ENGINE error message.
1
DISCONNECT cartridge from
remote starter.
2
PRESS AND HOLD
programming
button while re-connecting
cartridge to remote starter.
3
LED will fl ash red. Immediately
RELEASE
programming button.
4
LED will turn solid red for 2
seconds.
RESET COMPLETED .
IDENTIFY VEHICLE YEAR
1
Locate the Vehicle Identifi cation Number (VIN), identify the 10th
character then match it to its corresponding year.
4 Y 1 N 5 3 A 5 T A L 8 D 5 R 0 X
Æ
a 1980 L 1990 y 2000 a 2010
B 1981 M 1991 1 2001 B 2011
C 1982 n 1992 2 2002 C 2012
d 1983 p 1993 3 2003 d 2013
e 1984 r 1994 4 2004 e 2014
F 1985 s 1995 5 2005 F 2015
G 1986 T 1996 6 2006 G 2016
H 1987 V 1997 7 2007 H 2017
J
1988
W
1998
8
2008
J
2018
K 1989 X 1999 9 2009 K 2019
Æ
Page 11 of 11
BLADE-AL(TB)-FM3-EN
20170517
INSTALL GUIDE
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2017
Transponder Bypass
Ford/LincoLn
Doc. No.: ##39474##