U.S. Patent No. 8,856,780
CARTRIDGE INSTALLATION
1
Slide cartridge into unit. Notice
button under LED.
2
Ready for Module Programming
Procedure.
TYPE 1 - MODULE PROGRAMMING PROCEDURE - 1 OF 2
1
Insert key 1 into ignition.
2
Turn key 1 to ON position.
ON
!
If the module’s LED begins to fl ash RED, verify the RX
and TX connections between the module and the vehicle.
!
If the module’s LED turns solid BLUE for 2 seconds, the
Module Programming Procedure is completed.
NOTE
I
To complete this procedure,
both OEM keys are required.
5
Remove key 1.
6
Insert key 2 into ignition.
7
Turn key 2 to ON position.
ON
È
IMPORTANT: READ NEXT PAGE !
9
Turn key 2 to OFF position.
OFF
4
Turn key 1 to OFF position.
OFF
È
TIME RESTRICTI
º
N COMING UP !
12
Insert key 2 into ignition.
3
Wait, LED will turn solid RED
then will turn OFF.
8
Wait, LED will turn solid RED
then will turn OFF.
11
Press and release programming
button.
10
TIME RESTRICTI
º
N
Complete steps 10 to 13
within 5 SECONDS.
Remove key 2.
Page 7 of 11
BLADE-AL(TB)-FM3-EN
20170517
INSTALL GUIDE
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2017
Transponder Bypass
Ford/LincoLn
Doc. No.: ##39474##
