The product contains batteries described in Directive
2013/56 / WE, which can not be disposed of with other
household waste.
CONTROL DEVICES WITH A REMOTE CONTROL
μRemote has a multi-colored LED diode. The PRO version additionally has the
vibration function. It is powered from a built-in lithium battery, charged via
a micro-usb connector, with a standard 5V charger or USB connector. The
beginning of the battery charging is signaled with violet color. When the
battery is completely charged the LED diode turn off. Feature for the remote
control is available in devices of the wBox series, with software version above
0.500
The remote control communicates directly with wBox controllers - no router is
required. The communication of the remote control is bidirectional, the user
receives feedback information about the execution of the command of the
controller by using the signal of the LED diode (in the PRO version also by
using the vibration). The red LED indicates that an error has occurred.
1
GENERAL INFORMATION
Currently there are four groups (channels) to which controllers can be
assigned. Each group is defined by a different color. Group 1 (channel 1) - blu.
Group 2 (channel 2) - pink. Group 3 (channel 3) - green. Group 4 (channel 4) -
white. The selection of the group is made by briefly pressing the button ,
which changes the colors of the LED signaling, indicating the selection of the
group.
2
GROUP SELECTION
The unpairing is a procedure aimed at removing the connection between
the remote control and the wBox controller.
Pairing is a procedure aimed at creating a safe connection between the
remote control and the wBox controller.
Method 1
– remove the remote control from the list of “remote controls” in
the controller.
This is a standard method in case we have access to the controller but we do
not want to control it anymore with the remote control. In the controller
settings, in the “remote controls” section, delete the determined remote
control from the list. The controller from now on will not respond to the
commands of the remote control, while the remote control at the first attempt
to control, will automatically remove the association with the device, and will
signal the error with a blink of a red LED and additionally in the Pro version
with the vibration.
Method 2
– remove the controller association in the remote.
This method is recommended when we don't have access to the controller,
and we want to clear the memory of the whole group. Follow the pairing
procedure in accordance with points a) - d) However, in point e), instead of
3
PAIRING
You need to prepare the controller which is to be paired to the remote control,
by connecting to the phone with the application wBox and going to the
settings menu and next:
An error in the previous procedure will be signaled by a blinking LED in red
color. In this case youn need to repeat the procedure from the beginning.
b)
c)
d)
e)
f )
press and hold for approx. 2 sec. button - the LED will start blinking
press and hold (together) for about 2 seconds the central buttons of
the remote control: and - the LED will blink faster
press and keep pressed (together) for about 3 seconds the buttons of
remote control: and - the LED will blink even faster
briefly press the remote control button to enter to the pairing mode
- the LED will be permanently illuminated
within a maximum of 20 seconds, in the controller settings menu,
pleasepress the "Add remote control" button. The correct pairing will be
confirmed by the correct message and in the PRO version with a vi-
bration of the control remote.
a) select a determinated group by scrolling them with a short pressing of
the button
The remote control can be unpaired from the controller using two methods,
depending on the situation:
4
UNPAIRING
Avoid mechanical damage. Batteries can explode or cause burns if they
are damaged (e.g. crushed), or exposed to fire or high temperature.
Do not remove the casing of the device. The removal of the casing will
cause permanent damage to the product and will result in the loss of
the warranty.
1
2
3
4
1
2
3
4
control with the μWiFi technology
2 seconds
b)
c)
3 seconds
d)
3 seconds
e)
0,5 seconds
f)
application
