TyPe 4, 7, 8 & 11 - mOdULe PrOgramming PrOCedUre
8
Module Programming
Procedure completed.
7
Turn key to OFF position.
OFF
6
Release key from Start position
and return to ON position.
Wait, LED will turn solid GREEN
for 2 seconds.
ON
5
Turn key to Start position and
Hold for 3 seconds.
START
2
Insert key into ignition.
Wait 3 seconds.
4
Turn key to ON position.
Wait 3 seconds.
ON
3
Turn key to Accessory position.
Wait 3 seconds.
ACC
1
Close driver door.
Re-open driver door to wake up
data bus.
ADS-AL(TB)-PL 2-2 (-14)
PAGE X-X
TyPe 2, 3, 6 & 13 - mOdULe PrOgramming PrOCedUre
6
Module Programming
Procedure completed.
5
Turn key to OFF position.
OFF
2
Insert key into ignition.
4
Wait, LED will turn solid GREEN
for 2 seconds.
(If after 15 seconds the LED did
not turn solid GREEN, press on
the programming button once.)
3
Turn key to START position.
START
1
Close driver door.
Re-open driver door to wake up
data bus.
ADS-TBSL-PL
84
Page 18 of 19
ADS-TBSL-PL
20110120
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2011
Transponder Bypass
PASSLOCK
Doc. No.: ##4684##
