![background image](http://html1.mh-extra.com/html/idatalink/ads-tbsl-pl/ads-tbsl-pl_install-manual_3581816017.webp)
XX-XX
PAGE X-X
ADS-AL(TB)-PL 1-2
PAGE X-X
inSTaLLaTiOn mOde SeLeCTiOn
1
PRESS AND RELEASE
programming button
to
select installation mode
.
OR
Remote Starter
Standard Mode
LED fl ashes twice
x2
Remote Starter
Data Mode
LED fl ashes once
x1
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
2
PRESS AND HOLD
programming button
until LED turns solid GREEN
to
register selection
.
TyPe 1, 5, 9, 10 & 12 - mOdULe PrOgramming PrOCedUre
6
Module Programming
Procedure completed.
5
Turn key to OFF position.
OFF
2
Insert key into ignition.
4
Wait, LED will turn solid GREEN
for 2 seconds.
(If after 5 seconds the LED did
not turn solid GREEN, press on
the programming button once.)
1
Close driver door.
Re-open driver door to wake up
data bus.
3
Turn key to ON position.
ON
ADS-AL(TB)-PL
82
ADS-TBSL-PL
82
Page 17 of 19
ADS-TBSL-PL
20110120
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2011
Transponder Bypass
PASSLOCK
Doc. No.: ##4684##