ID View IV-100CD, Installation & Operating Manual

Page: 8 / 66

6
STOP button:
Press this to stop playing back a recorded video.
FWD button:
Press this to play a recorded video in the forward direction at faster or slower speeds than the
recorded speed. Each subsequent press of the FWD button increases or slows the rate.
PAUSE / STEP button:
In a playback display, press this to freeze the display. During the freeze, press this to display one
frame/field of a picture at a time in the forward direction.
REC button:
Push this to start recording the video into hard disks while in the live display mode.
＊
MUX /
●
DVR
button:
Press this to switch between the multiplexer decoded video and the encoded video to be
displayed as connected with a multiplexer. When the button light is on it indicates the unit is
displaying the decoded video (The pictures are not multiplexing). In this mode, the unit doesn’t
display the OSD message of the unit on the screen. However, it doesn’t affect the unit’s OSD
message which is recorded into hard-disk drive. When the button light is off it indicates the unit is
displaying encoded video (The picture is switching swiftly).
Right / Left buttons:
Press these two buttons to highlight desired items in the menu setup mode. For Key Lock
operation, press these two buttons simultaneously once; to disable Key Lock , press these two
buttons simultaneously again.
Up / Down buttons:
Press these two buttons to select the desired contents for programming in the menu setup mode.
ENTER
/
SAVE
ENTER/SAVE Button:
Press to enter the selected item and save the setting in the menu setup mode. During the
playback of a video, if you wish to save a specific image to a floppy disk, press the PAUSE button
to freeze the picture first and then press this button to proceed.
Indicator of Alarm Recording Mode:
Light up to signal the alarm record setting is on.
Indicator of Timer Recording Mode:
Light up to signal the scheduled record setting is on.
Indicator of Hard Disk Status:
Indicates the operation status of the hard-disk drives. Green light up indicates the hard-disk drive
is storing or retrieving the data. Red light up signals the hard-disk drive is getting filled up.
Power Indicator:
Indicates the power status of the unit.