52
1.4 Change the Record & Timer Properties Via the network
Follow the instructions below to reconfigure the record and schedule recording settings via the network.
A.
Set the regular record settings
1. When in the single –device mode, click to enter SETUP page. (See the sample screen as above A)
2. Select a desired recording rate and Quality from the respective drop-down list
3. Click the
OK
tag to proceed.
Set the Alarm record settings
1. When in the single –device mode, click to enter SETUP page. (See the sample screen as above A)
2. Set the ALRM SETTING to ON to enable the drop-down list in the ALARM SETTING area.
3. Select a desired recording rate and Quality from the respective drop-down list.
4. Click the
OK
tag to proceed.
Set the record timer
1. When in the single –device mode, click to enter SETUP page. (See the sample screen as above A)
2. Set the
RECORD TIMER
to
ON
to enable the
RECORD TIMER
setting area. All of
MODIFY
button will appear.
3. Click the
MODIFY
button to set the schedule for recording for each day. (See the sample screen below)
Enter in both the
START TIME
&
END TIME
boxes a specific
Hour: Minute
and click
OK
to return to the
SETUP
page.
4. When all required settings are done, click
OK
to proceed.
Summary of Contents for IV-100CD
Page 2: ......
