60
NOTE: When only one unit of the DVR is connected with a computer or LAN, you can freely assign
an IP address for the DVR. For example, there is a range of DVR IP addresses from
192.168.0.1 to 192.168.0.255. You can pick one for use from the range of IP. It’s not necessary
to set MASK and GATEWAY; leave the settings as default.
When a DVR is connected to a WAN, you must acquire a unique, permanent IP address and
correctly configure the MASK and GATEWAY settings according to your network architecture.
If you have any questions regarding those settings, please contact a qualified MIS
professional or your ISP.
NOTE: When connecting with a network, each connected DVR must be assigned a unique IP, which
must be in the same class type as your network address. IP addresses are written as four
sets of numbers separated by periods; for example, 314.278.74.8. Therefore, if the connected
network is identified as Class C, for example, the first three sets’ numbers of the DVR IP
address must be the same as the network address. If the connected network is identified as
Class B, the first two sets’ numbers of the DVR IP address must be the same as the network
address. If you have any questions regarding those settings, please contact a qualified MIS
professional or your ISP.
3 TCP/IP Communication Software
Follow the instructions below to install the TCP/IP communication program into your computer.
Click the
Start
Menu from your computer, and point to the
Settings/Control panel.
Summary of Contents for IV-100CD
Page 2: ......
