ID-AL ChronoPlayer - User Guide V1.0
Example
Folder Name
Action Performed by the Tag
001[J001][RS099] Playback of the folder 001 in a loop. On each loop of the folder, the message described
at line 099 of the file
serial.txt
is sent on the player's RS-232 output.
5.1.7 [WHL] - Play the Folder while the Assigned Input Combination
Remains Activated
This tag allows to play the contents of a folder as long as the corresponding input combination is activated.
When the input combination associated with the folder is deactivated, the player applies the folder exit tags.
As long as the corresponding input combination is activated, the folder is played in a loop.
Example
Folder Name
Action Performed by the Tag
001[WHL]
The folder 001 is played in a loop while the input combination 1 is activated. When the
input combination 1 is deactivated, the player stops.
002[WHL][J045] The folder 002 is played in a loop while the input combination 2 is activated. When the
input combination 2 is deactivated, the player plays the folder 045.
003[WHL][J999] The folder 003 is played in a loop while the input combination 3 is activated (inputs 1 and
2 activated). When the input combination 3 is deactivated (inputs 1 and 2 deactivated),
the player plays the folder 999.
The dry contact inputs of the player are combinatorial. Therefore, any changes of the input combination are
taken into account at any time by the player.
Example
Folder Name
Action Performed by the Tag
000[J000]
The folder 000 is played in a loop on startup.
001[WHL][J000] The folder 001 is played in a loop while the input combination 1 is activated (input 1
alone). If the input 2 is activated in addition to the input 1, this activates the input
combination 3, so the player plays the folder 003.
002[WHL][J000] The folder 002 is played in a loop while the input combination 2 is activated (input 2
alone). If the input 1 is activated in addition to the input 2, this activates the input
combination 3, so the player plays the folder 003.
003[WHL][J000] The folder 003 is played in a loop while the input combination 3 is activated (inputs 1 and
2 activated). If the input 1 is released, the player plays the folder 002. But, if the input 2 is
released, the player plays the folder 001.
5.1.8 [NXTxxx] - Play the Next xxx Audio Files each Time the Folder is
Played
This setting allows to play xxx audio files contained in the folder. Once xxx files have been played, the player
applies the folder exit tags. If the number of files requested by this tag is greater than the number of audio
files contained in the folder, the player loops in the folder as long as needed in order to play the exact
number of audio files requested.
With this tag, the player memorizes the played audio files, meaning that the audio files already played during
-19-
© 2016, Waves System
Note:
When a folder is played in a loop, the RS-232 message defined with the [RSxxx] tag is sent on each
loop of the folder.
