ELECTRIC BICYCLE METER KT
—
LCD10Y Product User Manual
- 37 -
After finishing L1 parameter setting, press
button (
SW
) to save the current
value and then enter L2 parameter setting interface.
○
L2 Parameter setting
L2 parameter is suitable for the super high-speed motor controller. The default of
the factory is 0.
L2 parameter will be activated when the value of P1 parameter exceeds 255. L2
parameter should use in combination with P1.
When L2=0, P1 parameter is set as the calculated value.
When L2=1, P1 parameter is set as a half of the calculated value.
After finishing L2 parameter setting, press
button (
SW
) to save the current
value and then enter L3 parameter setting interface.
○
L3 Parameter setting
L3 parameter is applicable to the dual mode controller. The default of the factory
is 1.
When L3=0, the controller will activate Non-Hall model only when the Hall
sensor in the motor fails
