ELECTRIC BICYCLE METER KT
—
LCD10Y Product User Manual
- 36 -
C15valte
Push-assist speed
4
4Km/H
5
5Km/H
6
6Km/H
After finishing C15 parameter setting, hold
button
(SW)
shortly to save current
set values and enter C1 parameter setting interface again. Or hold
button
(SW)
long
for about 2 seconds to exit C parameter setting environment and return to the display 1. Or
hold
button
(UP)
and
button
(DOWN)
at the same time to enter L parameter
setting.
○
Exit Parameter Setting
Under each parameter setting interface, if there’s no button operation on the meter for
more than 1 minute, and then the meter will automatically return to display 1, and the
original parameters will be saved.
L Parameter Setting
○
L1 Parameter setting
L1 parameters are applicable to the automatic under-voltage controller. The
default of the factory is 0.
When L1=0, the automatic under-voltage controller can automatically select
the under-voltage value according to the battery voltage.
When L1=1, the under-voltage value of the automatic under-voltage controller is
forced to be 20V.
When L1 = 2, the under-voltage value of the automatic under-voltage controller is
forced to be 30V.
When L1 = 3, the under-voltage value of the automatic under-voltage controller is
forced to be 40V.
