ELECTRIC BICYCLE METER KT
—
LCD10Y Product User Manual
- 39 -
Meter parameter copy wiring diagram
Special wiring cable
Turn on meter power supply of data source. Power supply of 48V or 36V or 24V is
available (VB + positive power supply). After wiring the meter needs to be copied, hold
button long till meter is startup. Within 5 seconds after startup, hold
button
(
UP
) and
button (
DOWN
) simultaneously for about 2 seconds, meter parameter
copy is completed. If the copy operation is correct, the meter subject to be copied will
display as follow.
Interface of finishing parameter copy
Please note:
Both C9 power-on password and C11 meter attributes can’t be copied.
Besides, LCD10Y meter can only copy parameter of the same meter model.
User Setting Note
After entering the user setting environment, if there’s no button operation on the data
for more than 1 minute, the meter will automatically return to display1, and the new set
parameters won’t be saved.
