14
10.2.
Error messages
Message
Cause
Solution
Corrupted
signature
Error in the wire rope parameters.
Use the optional « LOADER » software to update
the data bank.
Or, consult the manufacturer.
Corrupted
math
Error in the wire rope parameters.
Use the optional « LOADER » software to update
the data bank.
Or, consult the manufacturer.
Unknown
error
Unidentified error.
Consult the manufacturer.
!
See conditions § 8.1, 8.2 or 8.4
See § 8.1, 8.2 or 8.4
AD-L
The output signal from the tension
meter is too low.
Consult the manufacturer.
AD-H
The output signal from the tension
meter is too high.
Verify that the sensor is not overloaded.
Consult the manufacturer.
Z-er
The system cannot zeroing.
Connection problem between the
tension meter and the display.
Consult the manufacturer
11.
PRODUCT MARKINGS
1
Serial number
2
Identification (TYPE)
3
Wire rope diameters range
4
Maximal capacity
5
Protection rating
6
Symbol « Read the instruction Manual »
7
Power supply
HF 37/1/LPT
n° : XXXXXX
Ø
4 to 13 mm (3/16 to 1/2 in)
t
1500 daN (3360 lbs)
IP 65
AA (1.5 VDC) x 3
Made in Belgium
2
3
5
4
7
6
1
N°