Main Memory 3-5
Sy
st
em Inst
allat
io
n
Main Memory
The Endeavor Plus has two 168-pin DIMM slots that hold up to 512MB of 3.3V SDRAM.
Memory must be a PC100-compliant memory chip at a FSB clock frequency of 100MHz.
For best compatibility, procure tested memory modules from ICS Advent. If you need to source
memory from an outside vendor, choose well known suppliers such as Micron, Kingston, or
Crucial. A single or double-sided DIMM can be used. The two DIMMs can be any size up to
256MB.
Ensure adequate memory module contact and lock integrity with the DIMM socket. This will
impact the system reliability. Follow the normal procedure to install an SDRAM module into
the memory socket. Before locking the DIMM into place, make sure that the module has been
fully inserted into the DIMM slot.
Note:
(1) For maintaining system stability, do not change any of the
SDRAM parameters in BIOS setup to upgrade your system performance
without acquiring technical information. (2) Due to the Intel 810e chipset,
ECC or buffered (registered) SDRAM is not supported. If ECC SDRAM
is used, the system will respond with a warning message indicating that
this type of SDRAM will not benefit the system. Buffered (registered)
SDRAM will simply freeze up the system if installed.
