ICS CWS-200, Operator'S Manual, Page: 14 / 20

© 2010 ICS, Blount International Inc. Specifications are subject to change without notice. REV0810 F/N 542025
TITLE CWS-200 OPERATOR’S MANUAL
14
OPERATION
OPERATING REFERENCES
• The valve knob is off when it is in the center position. Turn the knob clockwise and the motor
will energize, but will stop when the knob is released. Turn the knob counter clockwise to the
detented “ON” position and the motor will energize and remain so when the knob is released.
To stop the motor, rotate the knob back clockwise to the center “OFF” position.
• Both manual rotation and traverse controls have two operation speeds. Commonly, “SLOW” is
best suited for the cutting operation and “FAST” is used to rapidly re-position the guide bar or
machine.
OFF
PULSE
VALVE KNOB
MANUAL MACHINE CONTROLS
ON
ROTATION
TRAVERSE
SLOW
SLOW
FAST
FAST