BIOS POST Check Point List 4-39
BIO
S
Se
tu
p
88
Returned from CMOS setup program and screen is cleared.
About to do programming after setup.
89
The programming after setup has been completed. Displaying
the power on screen message.
8B
The first screen message has been displayed.
The “
[WAIT...]
” message is displayed. Performing the PS/2
mouse check and the extended BIOS data area allocation
check.
8C
Programming the setup options next.
8D
Hard disk controller reset is next.
8F
Hard disk controller reset done. Floppy setup is next.
91
The floppy drive controller has been configured. Configuring
the hard disk drive controller.
95
Initializing the bus option ROMs from C800.
96
Initializing before passing control to the adaptor ROM at
C800.
97
Initialization before the C800 adaptor ROM gains control has
been completed. The adaptor ROM check is next.
98
The adaptor ROM had control and has now returned control
to the BIOS POST. Performing the required processing after
the BIOS POST regained control.
99
Any initialization required after the option ROM test has
been completed. Configuring the timer data area and printer
base address.
9A
Returned after setting the timer and printer base addresses.
Setting the RS-232 base address.
9B
Returned after setting the RS-232 base address. Performing
any required initialization before the coprocessor test.
Code
Description
(Continued)