xiv
Preface
Protecting Against Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation
and follow proper ESD procedure to reduce the risk of damage to components.
ICS Advent strongly encourages you to follow proper ESD procedure, which can
include wrist straps and smocks, when servicing equipment.
You can also take the following steps to prevent damage from electrostatic
discharge (ESD):
J
When unpacking a static-sensitive component from its shipping carton,
do not remove the component’s antistatic packing material until you
are ready to install the component in a computer. Just before
unwrapping the antistatic packaging, be sure you are at an ESD
workstation or grounded.
J
When transporting a sensitive component, first place it in an antistatic
container or packaging.
J
Handle all sensitive components at an ESD workstation. If possible,
use antistatic floor pads and workbench pads.
J
Handle components and boards with care. Don’t touch the components
or contacts on a board. Hold a board by its edges or by its metal
mounting bracket.
