ICRealtime MAX5XXD Series User Manual Download

Page: 23 / 195

If the HDD amount is less than four, you do not need to install the HDD bracket.

When there is a bracket, please make sure the installation direction of HDDs is the same.

3.4

Rack Installation

Please follow the steps listed below.



Use twelve screws to fix the unit



Please make sure the indoor temperature is below 35

℃

(95°f).



Please make sure there is 15cm (6 inches) space around the device to guarantee sound

ventilation.



Please install from the bottom to the top.



If there are more accessories connected in the rack, please take precaution measures in

case the rack power is overload.

3.5

Connecting Power Supply

Please check input voltage and device power button match or not.

We recommend you use UPS to guarantee steady operation, DVR life span, and other peripheral

equipments operation such as cameras.

3.6

Connecting Video Input and Output Devices

3.6.1 Connecting Video Input

The video input interface is BNC. The input video format includes: PAL/NTSC

BNC

（

1.0V

P- P

，

75Ω.

）

The video signal should comply with your national standards.

The input video signal shall have high SNR, low distortion; low interference, natural color and

suitable lightness.

Guarantee the stability and reliability of the camera signal:

The camera shall be installed in a cool, dry place away from direct sunlight, inflammable,

explosive substances and etc.

The camera and the DVR should have the same grounding to ensure the normal operation of the

camera.

Guarantee stability and reliability of the transmission line

BTT TB

Please use high quality, sound shielded BNC. Please select suitable BNC model according to the

transmission distance.

If the distance is too long, you should use twisted pair cable, and you can add video

compensation devices or use optical fiber to ensure video quality.

You should keep the video signal away from the strong electromagnetic interference, especially

the high tension current.

Keep connection lugs in well contact

BTTTB

The signal line and shielded wire should be fixed firmly and in well connection. Avoid dry joint,

lap welding and oxidation.

B TT TB

3.6.2 Connecting Video Output

Summary of Contents for MAX5XXD Series




































































































































































































Search results

Summary of Contents for MAX5XXD Series

Reviews:

Related manuals for MAX5XXD Series

Brands by name

Popular brands

ICRealtime MAX5XXD Series, User Manual

Search results

Summary of Contents for MAX5XXD Series

Reviews:

Related manuals for MAX5XXD Series

Brands by name

Popular brands