ICRealtime MAX5XXD Series User Manual Download Page 11

Page: 11 / 195

FEATURES AND SPECIFICATIONS

1.1

Overview

This series product is an excellent digital monitor product designed for security field. It adopts

embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and

G.711 audio compression technology realize high quality, low bit stream. Unique frame by frame

play function is suitable for detail analysis. It has various functions such as record, playback,

monitor at the same time and can guarantee audio video synchronization. This series product

has advanced technology and strong network data transmission function.

This series device adopts embedded design to achieve high security and reliability. It can work in

the local end, and at the same time, when connecting it to the professional surveillance software

(PSS), it can connect to security network to realize strong network and remote monitor function.

This series product can be widely used in various areas such as banking, telecommunication,

electric power, interrogation, transportation, intelligent resident zone, factory, warehouse,

resources, and water conservancy.

1.2

Features

This series product has the following features:



Real-time monitor

It has analog output port, VGA port and HDMI port. You can use monitor or displayer to realize

surveillance function.

System supports TV/VGA/HDMI output at the same time.



Storage function

Special data format to guarantee data security and can avoid vicious data modification.



Compression format

Support multiple-channel audio and video. An independent hardware decodes the audio and

video signal from each channel to maintain video and audio synchronization.



Backup function

Support backup operation via USB port (such as flash disk, portable HDD, burner).

Client-end user can download the file to local HDD to backup via network.



Record playback function

Support each channel real-time record independently, and at the same time it can support search,

forward play, network monitor, record search, download and etc.

Support various playback modes: slow play, fast play, backward play and frame by frame play.

Support time title overlay so that you can view event accurate occurred time

Support specified zone enlargement.



Network operation

Summary of Contents for MAX5XXD Series




































































































































































































Search results

Summary of Contents for MAX5XXD Series

Reviews:

Related manuals for MAX5XXD Series

Brands by name

Popular brands

ICRealtime MAX5XXD Series, User Manual

Search results

Summary of Contents for MAX5XXD Series

Reviews:

Related manuals for MAX5XXD Series

Brands by name

Popular brands