26
IR SENSITIVITY
:
4
IR CONTROL RULE
:
ZOOM PRIORITY
NEAR LIGHT
:
50
FAR LIGHT
:
50
IR LIGHT COMPENSATION
:
3
BACK EXIT
Menu Password
Move the cursor to the MENU PASSWORD and the click the confirm button to go to the fourth menu.
PASSWORD: Enable this function here so that you set password is valid. This function is on by
default after you set password.
SETTING: Click the confirm button to go to the password setup interface. Please use the left/right
button to set the value and then click the confirm button to confirm current option. Move the cursor to
the SAVE button and then click the confirm button to save current setup. Click the BACK button to
go to the previous menu.
BACK: Go back to the previous menu.
EXIT: Log out the system menu.
If you have forgot your password. After three times of login failure, system may pop up an 8-digit
internal code. Please contact our technical engineer for help.
4.4.5 IR Light Setting
Move the cursor
to “IR Light Setting” button and then click confirm button. You can go to the wiper setting
menu of the speed dome.
IR SENSITIVITY: It is to set the IR SENSITIVITY. The bigger sensitivity value is, the higher sensitivity
will be, click
“left”, “right” button to set.
IR LIGHT CONTROL RULE: It is to set the IR light control rule, it can be set as zoom priority and
manual, click “left”, “right” button to set.
NEAR LIGHT: It is to set near light brightness, click
“left”, “right” button to set.
Note: It is only valid when the IR light control rule is set as manual.
FAR LIGHT: it is to set the far light brightness, click
“left”, “right” button to set.
Note: It is only valid when the IR light control rule is set as manual.
IR LIGHT COMPENSATION: it is to set the overall brightness compensation for the IR light, click
“left”,
“right” button to set.
Note: It is only valid when the IR light control rule is set as zoom priority.
BACK: Go back to the previous menu.
EXIT: Log out the system menu.
4.5 Abnormity Handling
If users hope to restore the speed dome to factory default, please enter the main menu of the speed dome
“
SYSTEM INFORMATION > FACTORY DEFAULT
”, move cursor to FACTORY DEFAULT and click confirm
button. The speed dome will reboot and all the setups restore to factory default setup.
PASSWORD
:
1
2 3 4 5
6
7 8 9 0
→ SAVE BACK
PASSWORD
:
OFF
SETTING
:
BACK EXIT