22
IDLE ACTION
：
OFF
IDLE TIME
：
10MIN
ACTION TYPE
:
NONE
SN
：
NONE
BACK EXIT
TASK NO
：
1
TIME TASK
：
OFF
TASK SETTING
TASK INFORMATION
DELETE TASK
BACK EXIT
Move the cursor to PATTERN and click confirm button.
PATTERN NO
：
Here is to set pattern number. Please click left/right key to configure.
SETTING: Here is to memorize pattern starting point. An icon OK pops up in screen to prompt you
system begins memory pattern.
SETTING STOP
：
Here is to set pattern stop point. After all the movement, move the cursor to
SETTING STOP and then click confirm button. Now you have set one pattern. System pops up an icon
OK to prompt you system has memories one pattern.
CALL
：
Here is to activate pattern. Input pattern number, move the cursor to CALL and click confirm
button, system begins running pattern.
STOP: Here is to stop current pattern. Input pattern number, move the cursor to STOP and click confirm
button. System stops current pattern.
BACK: Go back to previous menu.
EXIT: Log out system menu.
Note:
The dwell time between two orders should be less than one minute, otherwise system will set to default
value as one minute.
After click PROGRAM
STOP, do not click CALL button before icon
“
●”
disappears completely.
Any manual operation during the pattern procedure will terminate current dome pattern operation.
4.4.4.6
Idle Function
Move the cursor to
“IDLE ACTION” and click ‘OK” button to set the idle action of the speed dome.
IDLE ACTION: The speed dome will execute the preset action if it didn
’t receive any valid command
during set time.
IDLE TIME: It is to set idle time, click
“left”, “right” button to set.
ACTION TYPE: It includes
“none/preset/ scan/tour/pattern” idle actions, click “left”, “right” buttons to
set.
SN: It is to set idle motion SN. System can implement the corresponding action when it is idle for the
specified period. Click the left/right button to set.
BACK: Go back to previous menu.
4.4.4.7
Auto Run (Schedule task)
TASK NO: Here you can set task number. Please use the left
’/right button to set.
