ICRealtime ICIP-P2300Y-IR, User Manual

Page: 22 / 38

16
HUE
：
50
BRIGHTNESS : 50
SATURATION
：
50
CHROMA SUPPRESS : 2
GAMMA
：
1
BACK EXIT
FOCUS MODE
：
AUTO
FOCUS LIMIT
：
10CM
FOCUS SENSITIVITY:
：
FAULT
ZOOM TRACKING : OFF
IR FOCUS CORRECTION
：
AUTO
BACK EXIT

DAY/NIGHT: It is to set camera day/night switch mode. It includes:
Photosensor/auto/schedule/color/B&W. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.

DAY/NIGHT TYPE: It is to set the camera day/night type, it includes: mechanical, electronic. Click
‘left”,
“right” button to set.

DAY TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY TIME
item and then click confirm button to go to setup. Please user up/down button to set the value. After
completed setup, please click confirm button to exit and move the cursor to
“Save” button to save
current setup.

NIGHT TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY
TIME item and then click confirm button to go to setup. Please user up/down button to set the value.
After completed setup, please click confirm button to exit and move the cursor to save button to save
current setup.

SENSITIVITY: It is to set the sensitivity of DAY/NIGHT.

SAVE: This button is for DAY TIME and NIGHT TIME setup. After you set the day time (or night time),
you need to move the cursor here and then click confirm button to save current time setup. For other
setups, you do not need to use this button.

BACK: Go back to previous menu.

EXIT: Log out system menu.
4.4.3.5 Focus Setup

FOCUS MODE: It is to set the camera focus mode. It includes several modes such as auto, manual,
semiautomatic.

FOCUS LIMIT: It is to set the camera focus limit. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.

FOCUS SENSITIVITY: It is to set the camera focus sensitivity. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.

ZOOM TRACKING: it is to set the camera zoom tracking, click the left/right button on the keyboard or in
the speed dome terminal menu to set.

IR FOCUS CORRECTION: It is to set the camera IR focus correction. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.

BACK: Go back to previous menu.

EXIT: Log out system menu.
4.4.3.6 Image Adjust
Move the cursor to IMAGE ADJUST and then click confirm button to go to the level 3 menu to set.