21
Move the cursor to highlight TOUR item and then click confirm button to go to set interface.
TOUR NO
：
Here is to ser tour number. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
TOUR SETTING: Move the cursor to tour setting item and then click confirm button. You can see the
following interface. Here you can add or remove the preset, and set the corresponding dwell time and
call speed.
DWELL: Here is t set dwell time. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
SPEED: Here you can set the speed value.
When you move the cursor to one tour number, you can use left/right button to turn the page.
When you move the cursor to one tour number, please click confirm button to set the tour. Please use
up/down button to set preset number, dwell time and speed. Use the left/right button to go to the next tour.
Click confirm button you can exit the setup. After you completed the setup, move the cursor to back button
to go to the previous interface.
DELETE TOUR
：
Here is to delete a tour. Input tour number in TOUR NO and then move the cursor to
DELETE TOUR, click confirm button to delete.
CALL: Here is to activate tour. Input tour number in tour NO and highlight CALL, click confirm button to
activate touring.
STOP: Here is to terminate touring.
BACK: Go back to previous menu.
EXIT: Log out system menu.
4.4.4.5
Auto Pattern
Pattern function can memory PTZ operation and camera focus zoom in and zoom out.
From the start position, dome begins auto movement repeatedly.
SN PRESET DWELL SPEED
01 000 005 013
02 000 005 013
03 000 005 013
04 000 005 013
05 000 005 013
06 000 005 013
07 000 005 013
BACK EXIT
PATTERN NO:
：
1
SETTING
SETTING STOP
CALL
STOP
BACK EXIT
