ICRealtime ICIP-P2300Y-IR User Manual Download Page 18

Page: 18 / 38

Move the cursor to SYSTEM INFORMATION and then click confirm button, you can see the above interface.
Here you can view dome basic information.

4.4.1.2

Address Information

Move the cursor to SITE INFORMATION and then click confirm button.



ADDR TYPE: System supports software address only.



ADDR-SOFT: It is to display speed dome software address. Please use the left/right button on the

keyboard or in the speed dome terminal menu to set. The value ranges from 1 to 255.



BACK: Go back to the previous menu.



EXIT: Log out system menu.

4.4.2 Display Setting

Before the operation, please make sure you purchased camera supports zoom function.

Move the cursor to DISPLAY SETTING and then click confirm button, you can go to the third submenu.

Please use the left/right button on the keyboard or in the speed dome terminal menu to set. After completed

setup, please click save button to save current setup.



PRESET TITLE: Display dome preset title or not. Please use the left/right button on the keyboard or in

the speed dome terminal menu to set. You can go to Function Setup->Preset section to set

corresponding preset value and preset title.



AZIMUTH DISP: Display dome current coordinates or not. Please use the left/right button on the

keyboard or in the speed dome terminal menu to set



TIME DISP: Display dome system time or not. Please use the left/right button on the keyboard or in the

speed dome terminal menu to set.



POSITION: Display the angel between the benchmark and then current location. Please use the

left/right button on the keyboard or in the speed dome terminal menu to set.



ZOOM DISP: Display speed dome optical zoom speed or not.



INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options:

℃

/F/Off.

Please use the left/right button on the keyboard or in the speed dome terminal menu to set.



RS485 DETECT: It will display wrong messy code when users control the speed dome in a situation

where RS485 connection is wrong. The function can be used to set if it will display the wrong code.



BACK: Go back to the previous menu.



EXIT: Log out system menu.

4.4.3 Camera Setting

Before the operation, please make sure your camera supports the corresponding function.

ADDR TYPE

：

SOFT

ADDR-SOFT

：

BACK EXIT

PRESET TITLE

：

AZIMUTH DISP

：

OFF

TIME DISP

：

OFF

POSITION

：

OFF

ZOOM DISP

：

OFF

INSIDE TEMP

：

RS485 DETECT

：

BACK EXIT

Summary of Contents for ICIP-P2300Y-IR







































Search results

Summary of Contents for ICIP-P2300Y-IR

Reviews:

Related manuals for ICIP-P2300Y-IR

Brands by name

Popular brands

ICRealtime ICIP-P2300Y-IR, User Manual

Search results

Summary of Contents for ICIP-P2300Y-IR

Reviews:

Related manuals for ICIP-P2300Y-IR

Brands by name

Popular brands