43
There are some item in bottom of scroll.
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface
with support for two IDE channels. Select
Enabled
to activate
each channel separately.
The Choice: Enabled, Disabled.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set
a PIO mode (0-4) for each of the four IDE devices that the
onboard IDE interface supports. Modes 0 through 4 provide
successively increased performance. In Auto mode, the system
automatically determines the best mode for each device.
The Choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA-33/66 implementation is possible only if your IDE
hard drive supports it and the operating environment includes a
DMA driver (Windows 95 OSR2 or a third-party IDE bus master
driver). If your hard drive and your system software both
support Ultra DMA-33/66, select Auto to enable BIOS support.
The Choice: Auto, Disabled.
USB Controller
Select
Enabled
if your system contains a Universal Serial Bus
(USB) controller and you have USB peripherals.
The Choice: Enabled, Disabled.
USB Keyboard Support
Select
Enabled
if your system contains a Universal Serial Bus
(USB) controller and you have a USB keyboard.
The Choice: Enabled, Disabled.
