50
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit
Setup if you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the
operating system can not boot.
The Choice: Enabled, Disabled .
Resource controlled by
The Award Plug and Play BIOS has the capacity to automatically
configure all of the boot as well as Plug and Play compatible
devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as
Windows
95. If you set this field to “manual” choose specific
resources by going into each of the sub menu that follows this
field (a sub menu is preceded by a “ ”).
The Choice: Auto(ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system
interrupt a type, depending on the type of device using the
interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned to
This item allows you to determine the IRQ assigned to the ISA
bus and is not available to any PCI slot. Legacy ISA for devices
compliant with the original PC AT bus specification, PCI/ISA PnP
for devices compliant with the Plug and Play standard whether
designed for PCI or ISA bus architecture.
The Choice: PCI Device, Reserved.
PCI/VGA Palette Snoop
Leave this field at
Disabled
.
