ICP Electronics ROCKY-3785EV Serial User Manual Download Page 6

Page: 6 / 64

1.1 Specifications

•

CPU

Support socket 370 bases CPU, Celeron®

Processor, 700MHz –1.2GHz or above

Pentium® III(FC-PGA) Processor, 1.26GHz or

above

•

DMA channels

: 7

•

Interrupt levels

: 15

•

Chipset

: Intel 815E

•

RAM memory

: Provide two 168 pin DIMM socket.

The memory capability is up to 512MB/133MHz.

•

Ultra ATA/33/66/100

IDE Interface

Two PCI Enhance IDE channel.

The south bridge ICH2 supports Ultra

ATA/33/66/100 IDE interface.

To support Ultra ATA66/100 Hard disk, a

specified cable must be available.

•

Floppy disk drive interface

: Single 2.88 MB,

1.44MB, 1.2MB, 720KB, or 360KB floppy disk drive.

•

CompactFlash

interface

: Supports

CompactFlash

Type II socket for Compact Flash Disk

or IBM Micro Drive.

•

Series ports

: Two high-speed 16C550 compatible

UARTs ports

•

Parallel Port

:one IEEE1284 compatible Bi-

directional ports

•

IrDA port :

Supports Serial Infrared(SIR) and

Amplitude Shift

Keyed IR(ASKIR) interface.

•

USB port :

Support two USB 1.0

compatible ports.

Summary of Contents for ROCKY-3785EV Serial

































































Search results

Summary of Contents for ROCKY-3785EV Serial

Reviews:

Brands by name

Popular brands

ICP Electronics ROCKY-3785EV Serial, User Manual

Search results

Summary of Contents for ROCKY-3785EV Serial

Reviews:

Brands by name

Popular brands