ICP Electronics JUKI-6752, Manual

Page: 4 / 21

3
• Two high speed Serial ports
: NS16C550 compatible UARTs, and one
RS422/485 port with auto-direction function.
•
Bi-directional Parallel Port :
•
IrDA port : Support serial Infrared (SIR) .
•
USB port : Support two USB ports for future expansion, USB 1.1
compliant.
•
Watch-dog timer
•
CompactFlash disk : The CompactFlash Storage Card also runs in True
IDE Mode that is compatible with an IDE disk drive. It can be used with a
passive adapter in a Type II socket.
•
Keyboard connector
•
Mouse : PS/2 Mouse Port on-board.
•
Power Consumption : +5V @ 2.4A
( Pentium/MMX-266,64MB SDRAM)
• Operating Temperature : 0 ° ~ 60 ° C ( CPU needs heat sink)
1.2 What You Have
Before you install the product, please check the following materials are
included in the package:
• 1 JUKI-6752 All-in-one single board computer
• 1 CD disk for utility and drivers
• 1 3.5" IDE flat cable (40-pin 2.0mm pitch to 40-pin 2.54mm pitch)
• 1 one to two 6pin mini Din connector for keyboard and mouse
• 1 combo serial port cable (RS-232/422/485)
• 1 standard D25 connector for parallel cable
• 1 floppy cable (for 3.5" FDD only)
If any of these items are missing or damaged, contact your distributor or
sales representative immediately.
4
2
Installation
This chapter describes how to install the JUKI-6752. At first, the
layout of JUKI-6752 is shown, and the unpacking information that
you should be careful is described. The jumpers and switches
setting for the JUKI-6752's configuration, such as watch dog timer,
are also included.
2.1 JUKI-6752 Layout
(Please refer to last page)