ICP Electronics JUKI-6752, Manual

Page: 9 / 21

13
3.5 VGA Connector(CN6)
The JUKI-6752 built in a 15-pin VGA connector that accepts the CRT
monitor.
•
CN6 : 15-pin Female Connector
1 RED 2 GREEN
3 BLUE 4 NC
5 GROUND 6 GROUND
7 GROUND 8 GROUND
9 VCC 10 GROUND
11 NC 12 DDC DATA
13 HSYNC 14 VSYNC
15 DDC CLOCK
3.6 LCD Interface Connector(CN7)
The JUKI-6752 provides a 2x25-pin connector for the LCD flat panel
interface .
The JUKI-6752 comes to support TFT/DSTN LCD panels at following
display options : (This is a reference table only, may support more
type of panels)
Display type Resolution Example
TFT VGA
640X480 , 64K Color,
18bits
Toshiba LTM10C209A
TFT SVGA
800X600 , 64K Color,
18bits
Toshiba LTM12C275A
TFT XGA
1024X768,64K Color,
36bits
Sharp LQ150X1DG11
The display options need to be setup manually from BIOS. The BIOS
“
Standard CMOS ” Setup will allow you to choose display resolution either
640X480 or 800X600.
14
•
CN7: LCD Interface Connector – support up to 36 bit LCD. For
better display quality, the length of LCD cable should be shorter
than 45 cm.
PIN NO. Description PIN NO. Description
1 NC 2 P33
3 P34 4 P31
5 P35 6 P32
7 P30 8 P28
9 P29 10 P27
11 P25 12 P26
13 P24 14 P21
15 P23 16 P22
17 P16 18 P20
19 P17 20 P18
21 P19 22 P14
23 P13 24 P12
25 P15 26 P11
27 P7 28 P10
29 FPVCC 30 FPVCC
31 P9 32 P8
33 P4 34 P6
35 P3 36 P5
37 P2 38 P1
39 M 40 P0
41 SHIFT CLOCK 42
ENABKL
43 FPVDD 44 FLM
45 ENAVEE 46 LP
47 GND 48 GND
49 +12V 50 +12V